MainPage      SearchListings
DC Servo Motor LM628 Motion Control Visual Basic Source Code - 2007-06-12 -
foto#0
foto#1

This zip archive contains the Visual Basic source code of the software that ran the mirror grinding machine you see in the movies above.  

The servo card used with this setup was a breadboard and used an 8255 interface.  You will certainly need to modify the driver end of the code to work with your particular hardware.  However there is alot here to learn from as an example of what to do and what NOT to do :)

 



See more ads in this category = Agro_Industrial_Commercial
Check if google has indexed this ad
Register to use eMarket-USA.com

To add to your social bookmarks
    Bookmarks - del.icio.us
    BookMark - Google
    BookMark - Yahoo MyWeb
Price
Handling 0.00
lbs 0.00
BoxLength 0
BoxWidth 0
BoxHeight 0
Stock 0

You can make this ad more visible by locating the following code in your site,blog or forum
.EMAIL= embeddedrf     at     cox.net .State.=Arizona .
.eBay ID= embeddedrf
.City.=Phoenix . Other listings of this user
. Ebay FeedBack Rating of embeddedrf .Quarter.= .
. .distance=12038 KM . MapOfLocation
-Large-Ball-Spline-for-Automation-Drive-Train-Servo-Motor-Drives-Arizona-Phoenix
-Medium-Ball-Screw-for-Automation-Drive-Train-Servo-Motor-Drives-Arizona-Phoenix
-Pyrex-Borosilicate-Clear-Rod-Diameter-1-inch-and-19mm-47-inches-long-Arizona-Phoenix
-Large-Ball-Spline-for-Automation-Drive-Train-Servo-Motor-Drives-Arizona-Phoenix
-Medium-Ball-Screw-for-Automation-Drive-Train-Servo-Motor-Drives-Arizona-Phoenix
-Pyrex-Borosilicate-Clear-Rod-Diameter-1-inch-and-19mm-47-inches-long-Arizona-Phoenix